COMMERCIAL GAS MANAGEMENT SERVICES

READY TO TAKE YOUR CALL: 01455 848 491

Laser Cutting Gas Installations

BCGA
BCGA
BCGA
BCGA
BCGA
BCGA

These are normally supplied via single cylinder manifolds or multi stage regulators.

Typical high purity gases

Helium

Nitrogen

Carbon Dioxide

The latest Fiber laser machines only require high pressure gases  for the cutting process.

Gascare Services offer a complete solution to your laser gas installation, from the manifold to the outlet position.

Our “competent” engineers will install your piped gas installation to the requirements of the BCGA (British Compressed Gas Association) Codes of Practice.

Upon completion of installation , and successful strength and leak testing a certificate is  issued.


Gascare Services offer a complete solution to your laser gas installation, from the manifold to the outlet position.

Our “competent” engineers will install your piped gas installation to the requirements of the BCGA (British Compressed Gas Association) Codes of Practice.

The majority of laser cutting machines require either Nitrogen or Oxygen gas (even both) delivered at high-pressure.

The gas is supplied via cylinders (MCP) or bulk tank, and will need a gas system capable of withstanding up to 31 bar.

The laser gases are supplied via single cylinders, and it is critical that the gas supply is Grade 5 (99.999%) high purity to prevent impuities affecting the laser process.

NEWS


Gas Test Certificates

Safety is paramount when it comes to gas and in order to ensure your business is safe, compliance with regulations and professional inspections is vital. The BCGA Codes of Practice apply to all systems that are pressurised higher than...

NEWS


Everything you need to know...

Often taken for granted, oxygen is integral to everything we do. Find out everything you need to know about oxygen here! Oxygen is essential to life – Its normal concentration in the air we breathe is approximately 21 %...